The new firmware v2.70 for the ScanStation P-Series will be available at the end of April.
Leica Geosystems announced and showcased the new firmware v2.70 for ScanStation P-Series at SPAR 3D this week, and the reception was “extraordinary” according to Juergen Mayer, Leica Geosystems business director, Terrestrial Laser Scanning, Geomatics Division.
Based on user feedback, v2.70 is part of the ongoing firmware improvement process that incorporates several new features specifically asked for by customers.
Here are the top 10:
- Range extension for the ScanStation P16
Maximum measurement range for the P16 has been increased from 40 m to 80 m. At the same time the highest resolution was also doubled from 1.6 mm to 0.8 mm at 10 metres.
- Mark detail scans in Scan Viewer
Detail scans in the Scan Viewer are marked with a frame around the scan area for a better identification.
- Target picking with red laser
In addition to the picking options “scan” and “video”, targets can now also be picked with the red guiding laser. This new feature works very well with shorter distances and is of great benefit in tunnelling applications with poor light conditions. The target is picked by just moving the red laser beam manually.
- Display brightness adjustment for improved readability
The on-board display now supports brightness adjustment for better readability at low light conditions.
- Target scanning in zenith direction
Targets can now be acquired in the zenith direction of the instrument, which helps to geo-reference the instrument in shafts, may it be elevator shafts in upright position or manholes for canalisation in headfirst position.
- Imaging now available for Detail Scan function
Based on user feedback the popular Detail Scan function was enhanced. It allows to define limited areas, which shall be scanned with a higher resolution than the rest of the scan. This function has been enhanced with imaging. The user can choose between “Scan only”, Image only” or “Scan & Image”.
- Automatic wake-up sessions for monitoring solutions
The instrument can now start to acquire data automatically. Pre-sets for date and time as well as for interval and number of iterations allow for a recurring scanning of an object without further user interaction required. This function can be used for monitoring tasks, for example.
- P-Series Simulator
The P-Series Simulator has been significantly enhanced. Up to five scanners can be connected. The remote computer works like a server, which stores scan data of all connected scanners simultaneously. All results are available immediately. This feature is also ideal for fixed monitoring installations.
- . Customised Intensity Mapping
Intensity Mapping can now be customised with individual colour schemes. Customisation can be done on the desktop with the new P-series Intensity Map Editor. Custom intensity mapping settings can then be uploaded to one or more instruments. As a result, scans from different scanner models (e.g., C10 and P40) can be combined to a point cloud with consistent intensity colouring.
- Export Control Points
Control points can be exported as a CSV file to an attached USB storage device. As an option targets can be added to the export.
The new firmware is compatible with all P-series scanners and can be used by all customers with a valid CCP contract. All new scanners will be delivered with v2.70 firmware installed.
To pre-order the new firmware, contact your local Leica Geosystems representative today.